Simond Store- Replacement Baffle Board 2 pcs set, SRV7037-112, Quadrafire 4300 Millennium ACC, 43ST-ACC (step Top), 2300F shops - BB-950155

Key Point:
•Replacements: 2 pcs Refractory Ceramic Fiber Baffle Board replacement part of Quadra-Fire # SRV7037-112.
•Each Baffle Board measures 0.5” (T) x 9.5” (W) x 15.5” (L) Approx.
•Compatibility: shops Quadrafire 4300 Millennium ACC, 43ST-ACC (Step Top)
•Purpose:
to replace burned and worn out baffles Inside the firebox, on top of the secondary air tubes.
The pre-cut size baffle is simple to replace, Its high heat resistance features help to keep warm air and waste gases inside the firebox for longer, allowing the burning fuel to produce
even more heat.

•Material: This high-temperature dense and low-thermal-conductivity ceramic baffle is composed of refractory ceramic fibers and specialty clay-based minerals, and has unique
features such as compressive strength, hot gas erosion resistance, and durability. It can withstand temperatures of up to 2300°F.

Description:

A ceramic baffle board is an ideal alternative for replacing your stove baffle. Compared to other ceramic fiberboards, this ceramic fiber Baffle Board is designed specifically for applications requiring low thermal conductivity, high compressive strength, and modulus of rupture with greater resistance to corrosion by hot gases.

This board has a slight odor during initial firing until the organic binders are burned off. After that, it will be pure white and odorless.

Ceramic Insulation Board is rated up to 2300F (1260C) peak and 2100F (1149C) continuous use with a melting point of 3200F(1760C).


Features:
•It has been pre-rigidized, which makes it more robust and dust-free.
•These two pre-cut baffle boards measure 0.5" x 9.5" x 15.5" (about.) and can be used to replace the Quadra fire baffle, but they can also be used for any other heat resistant purpose.
•This board can be cut to any shape and size using a small toothed hacksaw blade, knife drill, and machine. This board is not as strong as firebrick.
•Density: 45 Pcf (Min).
•Linear Shrinkage: 0.5 % Max (at 2192 °F x 24 Hrs.)
•Modulus of Rupture: 469 PSI (Min.) for 1” Thickness
•Compressive Strength: 284 PSI (Min) at 10% deformation